Exhaust Puch Maxi / E50 25mm Tecno Circuit

Tecno Circuit exhaust Puch Maxi / E50

• Suitable for 50cc and 70cc cylinders.
• Blank varnished with alu silencer.
• Good for torque, use this for your cross Puch
• 25mm outer diameter manifold
• Circuit exhaust 
• Very cool sound!
• Tip: Mount the exhaust with a silent rubber. When there is a lot of vibration, the rivets in the aluminium silencer can loose.

Dimensions:

• A: 150mm
• B: 180mm
• C: 520mm
• D: 140mm
• E: 130mm

Tips:

• Mount the exhaust with a silent rubber. When there is a lot of vibration, the rivets in the aluminium silencer can loose or the silencer can break
• Use our long brass M6 nuts in combination with hardened studs (see related products). This so you can easily and fully tighten the exhaust flange. Brass is also softer than steel, so it will not seize.
• Always use a new exhaust gasket when fitting an exhaust

When using all exhausts, black painted, chrome and blanc exhausts, heat build-up at the exhaust manifold can cause the following:

• At black outlets the paint can dissolve a little.
• Chrome and blanc exhaust manifolds may discolour

If the nozzle is too small or if the ignition is set incorrectly, the exhaust port becomes very hot and discoloring and dissolve of the paint on the exhaust manifold will occur faster than a perfectly adjusted engine. We give no guarantee on discoloration or solving of the paint on the exhaust manifold!